AIX PACK

Sachet Machines

Multi-Lane Sachet Machine

Define sachet format, sealing, dosing and line-interface requirements.

Complete multi-lane sachet machine showing the upper hopper, machine body, right-hand control screen and lower discharge
Multi-lane sachet equipment shown.
Contact the engineering team

A sachet format, a product-specific filling route

Sachet-machine detail showing film, guide rollers and the forming and sealing area.
Film path, guide rollers and the forming and sealing area shown in the sachet-machine detail.

Pack format and dosing are separate choices

Pack dimensions, seal layout and opening define the sachet you want to make. The actual product determines the feeding and dosing arrangement to evaluate. Start with these two decisions together: a sachet format alone does not establish that the same filling setup suits powders, granules and liquids.

Compare dosing methods
Four transparent sachets containing visible granules on the conveyor below the machine discharge.Watch sachet discharge · 10 sec
Separate operating example: four sachets entering the conveyor. This clip does not identify the configuration in the static photograph above.

See how sachets reach the conveyor

Four sachets leave the discharge area side by side and move along a conveyor. Use this example to discuss pack orientation, spacing and the next-machine handoff. Fill quantity, seal quality, cutting and discharge still need agreed checks for your product and film.

Prepare your material and film

YOUR SACHET PROJECT

Bring the pack, product and line requirements together

For several products or pack sizes, list each combination and its required output separately. A shared configuration needs a review of those combinations, not just one successful sample. Agree the trial conditions and checks, then record which product, film and pack the result covers. Start with the details you already have.

  1. 01Sachet geometry

    For a three-side-seal pack, mark the three seals and show how the remaining edge is formed; for a four-side-seal pack, mark all four seals. Include finished width and length, edge profile, tear/opening feature and print registration. Compare filling, sealing and opening with the intended product and film before confirming the forming and sealing configuration.

  2. 02Product route

    Give the target amount per sachet and describe the powder, granule, liquid or object, including its flow or handling behavior. Use those inputs to assess the feeding and dosing unit.

  3. 03Seal window

    Film structure, product contamination risk, sealing conditions and appearance criteria.

  4. 04Cut and discharge

    Cut profile, count or grouping logic, discharge direction and pack presentation.

  5. 05Connected scope

    For the quote, identify required inspection, coding, reject handling, cartoning or other downstream interfaces. Mark existing equipment and any equipment or connections that another supplier will provide.

Choose the next step

Let the next step close a real engineering question

Start engineering assessmentOrganize known and unknown inputs Prepare sample testingWhen product behavior needs testing Book a technical meetingWhen the scope needs joint review